Fans – Industrial Process

Three blower wheel designs make this a versa-tile exhauster. The MW wheel handles dust, abrasives and/or corrosives. The OW wheel is for fiberous materials. The AW wheel provides maximum efficiency on clean air. Capacities to 85,000 cfrn. Static pressure to 20″ W.G. Temperatures to 850°F. Accessories and special materials of construction are available.
These compact units, available with cast or fabricated fan housing, provide years of reliable, trouble-free service for many industrial applications. Type “E” capacities from 50 cfm to 12,000 cfm at static pressures to 83″ W.G. Type “RE” capacities from 50 to 1600 cfm at static pressures to 45.5″ W.G. Options include flanged connections, gas tight construction, special coatings and materials of construction.

Canada Blower “FM” high pressure exhausters are rugged exhausters pre-engineered in regard to ratings and construction detail. They are designed for air or gas moving applications with capacity requirements from 1,500 CFM to 27,000 CFM. Pressures range from 20″ W.G. to 40″ W.G. in eight sizes.

A low cost, cast iron housing fan to handle air, hot gases, corrosive or erosive gases, dust and stringy sub-stances. Fan capacities from 107 to 8,060 cf m. Static pressures for 1/2″ to 12″ W.G. Many options including stuffing boxes, flange connections, heat slinger and shaft seal.

Canada Blower Type “CB” blowers are for high pressures at moderate volume. Capacity range is from 150 CFM to 100,000 CFM and static pressures up to 150″ W.G. Type “R” blowers have been built to 200,000 CFM and pressures to 200″ W.G. However, Canada Blower sets no limits to size. Options include gas tight construction, heat slinger, special metals and many other features.

Fans – Special Materials

Canada Blower has for many years supplied air handling equipment in materials selected to resist corrosion or erosion. Today you can order certain Canada Blower fans in fiberglass reinforced plastic (FRP), cast iron, aluminum, stainless and most any other high alloy steel as well as with special coatings and linings. These fans are based on performance proven Canada Blower designs and built to Canada Blower quality standards.ventilating.com fanblower.com highpressureblower.net industrialblowerfan.com industrialfanblower.net industrialfanblower.com pressureblower.net northernindustrialsupplycompany.com industrialpressureblower.com tenderall.com chicagoblowercanada.com cbblower.com buffaloblower.com buffalofan.com nis-co.com canadianblower.com olegsystems.com canadablower.com abbblower.com acmefan.net industrialblower.net fansandblowers.net americanblower.net barryfan.com cincinnatifan.net canadafans.com barryfan.netpennbarry.net pennfan.net tcffan.com

Long considered fib, a an industry standard, the Industrial Exhauster in fiberglass reinforced plastic has taken on a new dimension as a mover of corrosive fumes. The efficient MW wheel is of solid FRP construction with encapsulated steel hub. The housing of FRP is rotatable to 15 discharge positions. Capacities are from 300 to 43,000 cfm and static pressures to 20″ W.G.

Move large volumes of corrosive fumes with these fiberglass rein-forced plastic ventilating fans. Both the FL and type “B” Axial are proven designs. FRP construction adds longevity to efficiency on corrosive service. FL capacities from 900 to 129,000 cfm, static pressures to 6″ W.G. Axial capacities from 2,000 to 60,000 cfm and static pressures to 3″ W.G.

Now offers its line of medium and high pressure blowers with fiberglass reinforced plastic housings, with wheels of fiberglass, special metal, or steel with suitable coating, depending on your operating conditions. Type E and RE Blower capacities to 3300 CFM and static pressures to 29″ W.G. with FRP wheel or 47″ W.G. with metal wheel. Type CB & R capacities to 50,000 CFM and static pressures to 100″ W.G.

RUBBER LINED FAN EXHAUSTERS

Lined exhausters, introduced over 30 years ago, are a good choice for many corrosive fume applications. Based on your operating conditions, Canada Blower engineers will suggest the correct fan to be rubber coated. Contact your Canada Blower Sales Representative for details.

High pressure blowers are available in a wide range of materials including stainless steel, titanium, aluminum, Everdur, Hastelloy, Monet and Inconel. They handle corrosive, abrasive, and inert gases to over 8000F at static pressures to over 100″ W.G.

CB / OP BL AEROFOIL FANS

The Canada Blower BL-Aerofoil fan is a high efficiency, low noise level fan for quality, optimum design alr conditioning and ventilation systems. Construction features include fan wheel blades that combine the best of backward curved and air foil designs … die-formed torusoidal inlet bell and matching wheel flange … heavier gauge steel and adequate bracing … heavier shaft and bearings … all put together with traditional Canada Blower quality fabrication and inspection. The Canada Blower BL-Aerotoil is built in Class I, II and III construction in capacities from III construction in capacities from 687 to 661,000 CFM and pressures to 12″.

Axial Flow Fans

Canada Blower Axial Flow Fans are a best buy for many industrial air moving jobs. Generally, an axial costs considerably less than a quality centrifugal fan delivering the same volume and pressure. They cost less to install since they are lighter, requiring minimum structural support. They can be duct mounted, taking up little space. Direct drive models mean faster start-up and the absence of beIt drive and fan bearings lowers maintenance costs. Adjustax Axial Fan feature an adjustable pitch blade wheel that permits matching your pressure/volume requirements exactly, and lets you make on the-job adjustments to compensate for system changes. Adjustax fan capacities from 3000 to 400,000 CFM, and to 20″ total pressure. Type “B” Axle’s have fixed blade wheels in capacities from 2600 to 330,000 CFM and to 5″ total pressure.

Canada Blower SWING OUT fans

The Canada Blower Acoustafoil Centrifugal Inline and the Canada Blower Centrifugal Tracked Swing Out”) fans are efficient low noise level fans designed for paint spray booth and other applications where substance build-up must be removed from the fan interior. The entire rotating assembly swings out to become fully accessible for maintenance.

These fan units meet the need for large volumes of exhaust and supply air. They feature a low silhouette, simple rugged construction to with- stand hurricane force winds and stand hurricane force winds and heavy snow loads, a wide choice of options and either belt or direct drive. Capacities to over 200,000 CFM and pressures to over 1″.