Types of industrial exhauster fan wheels available and typical applications
Today’s requirements for industrial blower exhausters demand a fan with high operating efficiency, versatility of application, rugged construction, and built-in ease of maintenance. “Canada Blower” engineers designed the Canada Blower Industrial Exhauster with these criteria in mind to best satisfy the Each wheel type has been specifically designed for particular industrial requirements thus assuring the optimum design for a given application. After fabrication, all needs of the plant maintenance engineer. This line of quality industrial fans offers the ideal solution to the air moving problems of modern industry and represent the result of over 98 years experience and engineering leader-ship in the manufacture of air handling equipment. “Canada Blower” fan wheels are both statically and dynamically balanced to ensure smooth, trouble-free operation.
Canada Blower fans are incorporated into OEM equipment such as:
Dust Collectors
Finishing Systems
Combustion Air Supply
Scrubbers
Air Purification
Filtration Units
Ovens Drying Systems
Fume Hoods
Air Make-Ups
Spray Booths
Downdraft Tables
Air-Conditioning
Material Conveying
Exhaust Systems
GRANULAR MATERIALS The ORB fan wheel is designed for efficient handling of clean air or air containing granular materials; grains, dust, abrasive exhaust from grinding or buffing operations, and is utilized in corrosive fume removal. The fan blades welded to the flange and backplate facilities fabrication from special materials or the application of corrosion-resistant coatings necessary for severe operating conditions. Certain metals may require riveted construction. The absence of a spider type construction ensures smooth air flow and accordingly raises the operating efficiency of this fan wheel.
FIBROUS MATERIALS The BP cone fan wheel is fabricated with a heavy gauge backplate, but with no front flange. Six radial steel plate blades are welded to the backplate and are reinforced by gussets welded to the blades and the hub. Omission of the flange allows free passage of fibrous materials such as wood shavings, ensilage, paper strips, textile products and other materials which normally tend to clog flanged type wheels. This design fan wheel with sharpened blades increases the capability of “chopping” fibrous materials as they are fed into the fan.
HOT GASES The AU air fan wheel is custom designed for maximum efficiency while handling hot air, gases, fumes — either clean or containing light concentrations of solid materials. The eight backwardly inclined, die-formed blades are curved slightly to maintain efficient gas flow in the fan.
Inlet side. Top horizontal fan discharge. Counter clockwise fan rotation.
Drive side. Top horizontal fan discharge. Counter clockwise fan rotation.
ARRANGEMENT 1 FANS
This arrangement is universally accepted for general industrial and “hot gas” applications due to its inherent versatility. It can be utilized for direct or V-belt drive depending on job requirements or customer preference. The wheel is overhung on one end of the shaft, while the bearings are mounted on a heavy, fabricated steel base. The fan shaft extends beyond the outer bearing base and has a keyway for installation of sheave or coupling. As in other fan arrangements, structural rigidity is added to the sub-base by welding heavy gauge gussets to the underside of the sub-base. Such construction ensures permanent alignment of bearings and provides exceptional strength for severe duty applications.
ARRANGEMENT 8 FANS
For large motor frames, a structural channel sub-base with integral motor slide base can be supplied in lieu of the standard Arr. 9 pivot base. Fan pictured shows fiberglass reinforced polyester construction.
Drive side. Top horizontal discharge. Counter clockwise fan rotation.
ARRANGEMENT 4 FANS
This compact fan arrangement does not require shaft or bearings since the fan wheel is over-hung on the motor shaft. It is ideally suited for operations at normal motor speeds but is limited to temperatures up to 200°F. To compensate for end thrust ball bearing motors must be used.
BLOWER HOUSING CONSTRUCTION
Canada Blower Exhausters are available in arrangements 1, 4, 8 and 9 plus the “packaged” arrangement #10 described on page 6. Canada Blower Exhauster construction is heavy gauge fabricated steel consisting of side sheets continuously welded to the scroll.
To facilitate a rigid inlet duct connection, an inlet collar is welded to the side plate and is extended to receive a slip fit connection. Inlet and outlet flanges already welded in place and punched for connection bolts can be supplied upon request. On sizes #70 thru #120, outlet flanges are standard features of constructionventilating.com fanblower.com highpressureblower.net industrialblowerfan.com industrialfanblower.net industrialfanblower.com pressureblower.net northernindustrialsupplycompany.com industrialpressureblower.com tenderall.com chicagoblowercanada.com cbblower.com buffaloblower.com buffalofan.com nis-co.com canadianblower.com olegsystems.com canadablower.com abbblower.com acmefan.net industrialblower.net fansandblowers.net americanblower.net barryfan.com cincinnatifan.net canadafans.com barryfan.netpennbarry.net pennfan.net tcffan.com.
ARRANGEMENT 8 FANS
This complete factory aligned unit requires minimum drive adjustment when received in the field. It is ready to go on the job immediately. We suggest checking alignment before operating unit because of possible damage during transit. The motor sub-base, continuously welded to the bearing sub-base, combined with the flexible coupling connection assures permanent shaft alignment. This configuration is well suited for handling gases at temperatures to 850°F. with the modifications as shown on page 10.
ARRANGEMENT 9 FANS
Similar to the arrangement 1 fans, this unit features an adjustable motor mount attached to the side of the bearing pedestal. The motor mounting consists of a pivot base assembly which provides rigid motor support assuring perfect sheave alignment, easy method of adjusting belt tension, and minimum field erection. Motors are limited in size.
FAN HOUSING CONSTRUCTION
ARRANGEMENT 10 FANS
Increased demand for complete package units suitable for outdoor installation prompted “Canada Blower” engineers to design this compact, integral unit. A sheet metal weather hood for motor, bearings and drive protection can be provided to offer maximum weather protection while providing adequate motor cooling. Motor sizes which can be used are limited.
ARRANGEMENT 10 FANS
Increased demand for complete package units suitable for outdoor installation prompted “Canada Blower” engineers to design this compact, integral unit. A sheet metal weather hood for motor, bearings and drive protection can be provided to offer maximum weather protection while providing adequate motor cooling. Motor sizes which can be used are limited.
OPTIONAL FAN ACCESSORIES
Flanged inlet and outlet Where fan installations require tight duct connections, inlet and outlet flanges can be supplied welded in place and punched for connection bolts. Flanged outlet is standard for sizes #70 thru #120.
Drain connection The standard drain connection consists of a threaded pipe coupling welded to the lowest point on the scroll to allow condensate or other liquids to drain. Standard pipe or traps can be easily connected to this drain.
Cleanout door For easy access to the wheel and housing interior for inspection or cleaning, this quick release door is securely held by refrigerator type latches. The door is shaped to conform with the scroll curvature and is gasketed to minimize gas leakage.
Outlet dampers Standard outlet damper is fabricated in a separate frame and is conveniently flanged for duct connection. The blades operate in parallel and rotate in bearings located outside of air stream. This damper offers satisfactory control of air volume for most applications. For extremely accurate volume control, Canada Blower can offer the opposed blade or proportioning type damper.
OSHA Belt Guard Heavy gauge lock form construction provides personnel protection from belts on Arr. #9 and Arr. #10.
OSHA Coupling & Shaft Guards Features lock-form construction and offers protection from rotating coupling.
Heat Slinger This cast aluminum rotor creates a strong circulation of ambient air over the shaft and inboard bearing and also shields bearings from hot gases which may escape through the housing. The heat slinger reduces heat conduction from shaft to bearings.
Shaft Seal Seals are furnished with a removable split cover and are bolted to the housing side limiting the air leakage around the shaft.
Stuffing Box Consist of three rows of grafoil packing.
Other Accessories OSHA inlet screens and OSHA outlet screens are available upon request.
OPTIONAL FAN CONSTRUCTION
Extra Heavy Fan / Blower Construction — Where industrial fan applications require the removable of erosive materials in heavy concentrations, “Canada Blower” can provide extra heavy construction in any one of the following combinations: extra heavy housing, extra heavy wheel, and oversize shaft and bearings. Usually oversize shaft and bearings are required when an extra heavy wheel is used. Special Coatings — Industrial fan applications involving corrosive fume removal require special construction. “Canada Blower” fan exhauster construction lends itself very well to the application of resistant coatings for this severe duty. The large flat surfaces of the fan wheel offer an. ideal surface for the application of various protective coatings, each suitable for a particular air handling problem. To assure long lasting adhesion of coatings of special paints, interior surfaces of the fan can be sand-blasted, edges rounded and weld nuts or studs replacing nut and bolt type fasteners. For particularly severe applications, “Canada Blower” can supply fiber glass exhausters or rubber covered fans. Special Metals — To meet requirements of special applications, such as handling corrosive gases at elevated temperatures, “Canada Blower” industrial fans can be constructed of special metals including aluminum, monel, stainless steel, titanium, Hastelloy, or others as may be required.
STANDARD FOR SPARK RESISTANT FAN CONSTRUCTION
Where the danger of explosion exists, Canada Blower fan exhausters can be constructed to meet AMCA standards for type A, B or C spark resistant construction. Consideration should also be given to the use of explosion proof motors and for spark resistant V-drive belts in such applications.
| Type | Construction |
|---|---|
| a | All parts of the fan in contact with the air or gas being handled shall be made of non-ferrous material. |
| b | The fan shall have an entirely non-ferrous wheel and non-ferrous ring about the opening through which the shaft passes. |
| c | The fan shall be so constructed that a shift of the wheel or shaft will not permit two ferrous parts of fan to rub or strike. |
Extra Heavy Duty Fan Construction —Where industrial fan applications require the removable of erosive materials in heavy concentrations, “Canada Blower” can provide extra heavy construction in any one of the following combinations: extra heavy housing, extra heavy wheel, and oversize shaft and bearings. Usually oversize shaft and bearings are required when an extra heavy wheel is used. Special Coatings — Industrial fan applications involving corrosive fume removal require special construction. “Canada Blower” exhauster construction lends itself very well to the application of resistant coatings for this severe duty. The large flat surfaces of the fan wheel offer an. ideal surface for the application of various protective coatings, each suitable for a particular air handling problem. To assure long lasting adhesion of coatings of special paints, interior surfaces of the fan can be sand-blasted, edges rounded and weld nuts or studs replacing nut and bolt type fasteners. For particularly severe applications, “Canada Blower” can supply fiber glass exhausters or rubber covered fans. Special Metals — To meet requirements of special applications, such as handling corrosive gases at elevated temperatures, “Canada Blower” industrial fans can be constructed of special metals including aluminum, monel, stainless steel, titanium, Hastelloy, or others as may be required.
HOT GAS EXHAUSTERS
high temperature fan, high temperature blower,high temperature ventilator,oven exhaust fan,oven exhaust ventilator,oven circulation fan,oven circulating fan
OTHER Canada Blower INDUSTRIAL FANS AND BLOWERS
R PRESSURE BLOWERS Type “R” Heavy Duty Pressure Blowers are custom engineered versions of a Type “CB.” Modifications are based on operating conditions involving temperature extremes, corrosives, erosives and higher pressures. Type”R”and Type “CB” Pressure Blowers are computer-selected to meet system requirements.
RE BLOWERS Similar to “E” Blowers, the RE has a cast iron housing which is often better suited to certain corrosive or erosive applications. Fabricated steel housings are also available. Capacities from 50 CFM to 1600 CFM at static pressures to 45.5″ W.G.
CB PRESSURE BLOWERS Designed for the process indus¬tries, CB Pressure Blowers deliver high pressure (to 5 Psig) at moderate volume (to 100,000 CFM). Rugged construction provides a long service life on a variety of demanding applications including pneumatic conveying, glass blowing, gasboosting and air pol lution control systems.
E BLOWERS A compact, reliable blower designed to handle a variety of industrial applications requiring moderate capacities at high pressure. The “E” Blower has a cast iron or fabricated steel housing. Capacities from 50 CFM to 12,000 CFM at static pressures to 80″ W.G.
FRP FAN EXHAUSTERS These fiberglass reinforced plastic exhausters provide excellent corrosion resistance, with the operating efficiency of a proven fan design. Capacities from 300 cfm to 43,000 cfm. Static pressures to 20” W.G.
HIGH PRESSURE TYPE “HW” INDUSTRIAL EXHAUSTERS
Canada Blower “HW” High Pressure Industrial Exhausters are designed for air or gas moving applications with capacity requirements from 1,500 cfm to 27,000 cfm in a pressure range from 20″ W.G. to 40″ W.G., in 8 unit sizes. The “HW” is a rugged, heavy duty exhauster, preengineered with regard to ratings and construction detail. They are economical and require minimum delivery time. This product is based on over 100 years of Canada Blower leadership in designing and manufacturing industrial fans, and application expertise is readily available from a Canada Blower Sales Engineer.
Canada Blower centrifugal fans, often called as blowers, are special type of industrial fans that are ideal for high pressure applications in several process industries and air pollution systems. Centrifugal fans increase the pressure of an incoming airstream by impellers, a series of blades mounted on a circular hub, which in turn accelerates air radially and alters the direction of the outward flowing air, usually by 90°. As centrifugal fans are constant volume devices that create steadier flow of air than axial fans, they are most widely used in various industrial processes such as in transporting air/gas and material handling.
Centrifugal fans are broadly divided into six basic types based on the blade configuration. Each type of Canada Blower centrifugal fan has its own application range and limited ability to perform in the industrial processes.